• Explorer2

    Industrial Hydraulics

    A Comprehensive Maintenance Training System For Industrial Hydraulics

    The Explorer II is one of four building blocks in the advanced Explorer Series of technology systems. The other advanced modules address the principles and applications of industrial pneumatics, electromechanics and programmable logic controllers. They are designed to interface with the Explorer II, and can be brought together using mobile benches available from TII. A major advantage of the TII system over traditional training programs is that each segment can also be operated separately, giving trainees more space and instructors greater flexibility.
  • Specifications

  • The Explorer II is a complete education/training system that covers hydraulic technology in its four areas of instruction: Fundamentals, Applications, Physical Properties and Maintenance. It is constructed of an extruded and welded aluminum "U" channel frame with a formed sheet steel shell. The system is modular in design so that it may be used as a stand-alone table, on a counter top or integrated into a bench configuration with other TII trainers. The panel includes two sections:
    1. The Instrumentation Section of the panel is mounted at eye level for easy reading of gauges. The panel is constructed of 16 gauge chrome plated and brushed steel. All gauges, cylinders and other instruments have been identified in large lettering on the panel. The Instrumentation Section includes a system pressure gauge, two in-line pressure testing gauges, a four-port pressure manifold, a four-port return manifold, a 24-volt DC power supply and a momentary switch with output jacks.
    2. The Component Panel is mounted at an angle for ease of use when building circuits. It is constructed of 16-gauge chrome plated and brushed steel and all instruments are clearly identified. The component panel includes: a 4-way, 2-position solenoid directional control valve; a relief valve; a sequence valve; a pressure reducing valve; a compensated flow control valve; an uncompensated flow control valve; a needle valve; a check valve; a double acting cylinder (5" stroke, 1-1 /16" bore); and a double acting cylinder (5" stroke, 1-1 /2" bore). The Work Surface at the bottom of the component panel is used for conducting experiments and building circuits.
Industrial Hydraulics